Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Manual Seat)
RM2070E _58 Vehicle Interior _061944 SEAT _0301816 FRONT SEAT ASSEMBLY(for Manual Seat) G

SEAT  FRONT SEAT ASSEMBLY(for Manual Seat)  INSPECTION  


PROCEDURE

Hide 71630S 1.INSPECT LUMBAR SUPPORT ADJUSTER ASSEMBLY (SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY)

a.

Check operation of the lumbar support adjuster assembly (separate type front seatback spring assembly).

B465334E01
1.135,2.365 1.448,2.563 0.313,0.198 10 false *a 2.49,2.375 2.802,2.573 0.313,0.198 10 false *b 4.438,1.875 4.75,2.073 0.313,0.198 10 false *c

i.

Check if the seat moves smoothly when the auxiliary battery is connected to the lumbar support adjuster assembly connector terminals.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → 1
Auxiliary battery negative (-) → 2
Hold
Auxiliary battery positive (+) → 2
Auxiliary battery negative (-) → 1
Release


Text in Illustration
*a Hold
*b Release
*c Component without harness connected
(Lumbar Support Adjuster Assembly (Separate Type Front Seatback Spring Assembly))

If the result is not as specified, replace the lumbar support adjuster assembly (separate type front seatback spring assembly).