Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Manual Seat) › from 2014.11
RM2070E _58 Vehicle Interior _061944 SEAT _0301816 FRONT SEAT ASSEMBLY(for Manual Seat) A

SEAT  FRONT SEAT ASSEMBLY(for Manual Seat)  DISASSEMBLY  


PROCEDURE

Hide 72526A 1.REMOVE RECLINING ADJUSTER RELEASE HANDLE

a.
B229811E01
1.147,0.537 1.357,0.713 0.210,0.176 10 *1 0.765,0.705 1.147,0.635 false

Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.

Text in Illustration
*1 Protective Tape


Hide 72495 2.REMOVE VERTICAL ADJUSTING HANDLE (w/ Vertical Adjuster)

a.
B229813

Remove the screw and vertical adjusting handle.


Hide 71812D 3.REMOVE FRONT SEAT CUSHION SHIELD

a.
B284787

Remove the screw.


b.

w/o Lumbar Support:

i.

Disengage the 6 claws and clip, and remove the front seat cushion shield.



c.

w/ Lumbar Support:

i.

Disengage the 6 claws and clip.


ii.
B229817

Disconnect the connector.


iii.

Disengage the 5 clamps and remove the front seat cushion shield.



Hide 84920 4.REMOVE POWER SEAT SWITCH ASSEMBLY (w/ Lumbar Support)

Hide 73240 5.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

Hide 73230 6.REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

Hide 71862 7.REMOVE FRONT SEAT INNER CUSHION SHIELD

a.
B284789

Disengage the 5 claws and remove the front seat inner cushion shield.


Hide 8.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

a.
B229821

Disconnect the rubber band.


b.
B284792

Disengage the fastener and separate the airbag wire harness.


c.

w/ Seat Heater System:

i.

Disengage the clamp and disconnect the seat heater wire harness.



d.
B229834

Disengage the 4 hooks.


e.

for 6 Way Seat Type:

i.
B229842

Disengage the 2 hooks as shown in the illustration.



f.

for 4 Way Seat Type:

i.
B292111

Using a clip remover, remove the 2 clips.



g.

Disengage each hook and remove the separate type front seat cushion cover with pad as shown in the illustration.

B229838


Hide 71072S 9.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B232925

Remove the 2 hog rings.


b.
B284793

Remove the 15 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.


Hide 10.REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD

a.
B282166

Disengage the claw and 4 clamps to disconnect the airbag wire harness.


b.

for Front Passenger Side:

i.
B229825

Disengage the guide and disconnect the belt warning occupant detection sensor.



c.
B284794

Remove the 5 hog rings.


d.
B229850E03
1.49,0.688 1.844,1.531 1.844,1.531 2.146,0.74 true 1.771,1.563 1.927,1.75 0.156,0.188 10 false *1

Remove the 3 hog rings and disconnect the fastening rubber.

Text in Illustration
*1 Fastening Rubber


e.
B229856

Disengage the 4 claws and remove the 2 front seat headrest supports.


f.
B229854

Turn back the separate type front seatback cover to remove the nut, and separate the bracket of the separate type front seatback cover.


g.

Remove the separate type front seatback cover with pad from the front seatback spring assembly.


Hide 71074S 11.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B229857

Remove the 5 hog rings.


b.
B229859

Remove the 2 hog rings and disconnect the fastening rubber from the separate type front seatback pad.


c.

Remove the separate type front seatback cover from the separate type front seatback pad.


Hide 71875G 13.REMOVE RECLINING ADJUSTER INSIDE COVER LH

a.
B284866

Disengage the guide and remove the reclining adjuster inside cover LH.


Hide 71876 14.REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT:

Use the same procedure as for the LH side.


Hide 71874 15.REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (w/ Vertical Adjuster)

a.
B284797

Disengage the hook as shown in the illustration.


b.
B229873

Remove the screw.


c.

Disengage the clip and remove the front seat lower cushion shield LH.


Hide 71873 16.REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (w/ Vertical Adjuster)

HINT:

Use the same procedure as for the LH side.


Hide 71537F 17.REMOVE NO. 2 FRONT SEAT CUSHION PROTECTOR

a.
B284868

Remove the screw.


b.

Disengage the 2 guides and remove the No. 2 front seat cushion protector.


Hide 71537E 18.REMOVE NO. 1 FRONT SEAT CUSHION PROTECTOR

HINT:

Use the same procedure as for the No. 2 front seat cushion protector.


Hide 82168 19.REMOVE NO. 2 SEAT WIRE (w/ Lumbar Support)

a.

for LHD:

i.
B284791

Disengage the 4 clamps.



b.

for RHD:

i.
B318149

Disengage the 2 clamps.



c.
B229881

Disconnect the connector.


d.

Disengage the 2 clamps and remove the No. 2 seat wire with front seat wire.


e.
B315770

Disconnect the connector to remove the No. 2 seat wire from the front seat wire.


Hide 71640S 20.REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY

a.
B318150

Remove the 4 bolts and separate type front seatback spring assembly from the separate type front seat cushion spring assembly.


Hide 72211C 21.REMOVE SEAT TRACK ADJUSTING HANDLE

a.
B284703

Disengage the 2 hooks and remove the seat track adjusting handle from the separate type front seat cushion spring assembly.