Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for Side) › 2014.11–2016.05
RM2070E _58 Vehicle Interior _061944 SEAT _0301818 REAR NO. 1 SEAT ASSEMBLY(for Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for Side)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR NO. 1 SEAT ASSEMBLY

a.

Place the rear No. 1 seat assembly in the cabin.

NOTICE:

Be careful not to damage the vehicle body.



b.

Temporarily install the rear No. 1 seat assembly with the 4 bolts.


c.

Lift up the rear seat track adjusting handle and move the seat to the rearmost position.


d.
B314595E01
2.066,1.92 2.275,2.100 0.210,0.180 10 (1) 0.454,1.136 0.664,1.317 0.210,0.180 10 (2)

Tighten the 2 bolts on the front side of the seat.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



e.

Lift up the rear seat track adjusting handle and move the seat to the foremost position.


f.
B314596E02
1.49,1.417 1.698,1.594 0.208,0.177 10 true (1) 1.875,0.833 2.083,1.01 0.208,0.177 10 false (2)

Tighten the 2 bolts on the rear side of the seat.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)

HINT:

Tighten the bolts in the order indicated in the illustration.



Hide 2.INSPECT SEAT SLIDE ADJUSTER LOCKS

a.

During the sliding operation of the rear seat, check that the left and right adjusters move together smoothly and lock simultaneously. If the seat adjusters do not lock simultaneously, loosen the seat installation bolts to adjust the adjuster position.


Hide 72157B 3.INSTALL REAR INNER SEAT TRACK BRACKET COVER RH

Hide 72158A 4.INSTALL REAR INNER SEAT TRACK BRACKET COVER LH

Hide 72128A 5.INSTALL FRONT INNER SEAT TRACK BRACKET COVER LH (for Rear No. 1 Seat LH Side)

Hide 72127A 6.INSTALL FRONT INNER SEAT TRACK BRACKET COVER RH (for Rear No. 1 Seat RH Side)

Hide 72124C 7.INSTALL FRONT OUTER SEAT TRACK BRACKET COVER

a.

Engage the 2 claws to install the front outer seat track bracket cover.


Hide 71940A 8.INSTALL REAR SEAT HEADREST ASSEMBLY