Home › Vehicle Interior › SEAT › REAR NO. 1 SEAT ASSEMBLY(for Side) › 2012.03–2014.11
RM2070E _58 Vehicle Interior _061944 SEAT _0301818 REAR NO. 1 SEAT ASSEMBLY(for Side) A

SEAT  REAR NO. 1 SEAT ASSEMBLY(for Side)  REMOVAL  


PROCEDURE

Hide 71940A 2.REMOVE REAR SEAT HEADREST ASSEMBLY

Hide 72124C 3.REMOVE FRONT OUTER SEAT TRACK BRACKET COVER

a.

Lift up the rear seat track adjusting handle and move the seat to the rearmost position.


b.
B313898

Disengage the 2 claws and 2 guides, and remove the front outer seat track bracket cover.


Hide 72128A 4.REMOVE FRONT INNER SEAT TRACK BRACKET COVER LH (for Rear No. 1 Seat LH Side)

Hide 72127A 5.REMOVE FRONT INNER SEAT TRACK BRACKET COVER RH (for Rear No. 1 Seat RH Side)

Hide 72158A 6.REMOVE REAR INNER SEAT TRACK BRACKET COVER LH

Hide 72157B 7.REMOVE REAR INNER SEAT TRACK BRACKET COVER RH

Hide 8.REMOVE REAR NO. 1 SEAT ASSEMBLY

a.

Disconnect the connector.


b.
B314596

Remove the 2 bolts on the rear side of the rear No. 1 seat assembly.


c.

Lift up the rear seat track adjusting handle and move the seat to the rearmost position.


d.
B314595

Remove the 2 bolts on the front side of the rear No. 1 seat assembly.


e.

Lift up the rear seat track adjusting handle and move the seat to the center position. Also, operate the reclining adjuster release handle and move the seatback to the upright position.


f.

Remove the rear No. 1 seat assembly.

NOTICE:

Be careful not to damage the vehicle body.