Home › Vehicle Interior › SEAT › LUMBAR SWITCH
RM2070E _58 Vehicle Interior _061944 SEAT _0301819 LUMBAR SWITCH G

SEAT  LUMBAR SWITCH  INSPECTION  


PROCEDURE

Hide 84920 1.INSPECT POWER SEAT SWITCH ASSEMBLY

a.
B313251E01
0.18,0.165 0.355,0.314 0.174,0.149 10 *A 1.19,1.419 1.340,1.568 0.150,0.149 10 *a 1.637,1.419 1.787,1.568 0.150,0.149 10 *b 0.18,1.901 0.355,2.050 0.174,0.149 10 *B 2.126,3.155 2.276,3.304 0.150,0.149 10 *a 1.679,3.155 1.829,3.304 0.150,0.149 10 *b 0.647,3.499 0.797,3.648 0.150,0.149 10 *c

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Hold Below 1 Ω
1 - 2
4 - 5 Off
1 - 2
4 - 5 Release
1 - 3


Text in Illustration
*A for LHD
*B for RHD
*a Hold
*b Release
*c Component without harness connected
(Power Seat Switch Assembly)

If the result is not as specified, replace the power seat switch assembly.