Home › Vehicle Interior › SEAT › FRONT SEAT CUSHION HEATER › 2012.03–2014.11
RM2070E _58 Vehicle Interior _061944 SEAT _0301822 FRONT SEAT CUSHION HEATER G

SEAT  FRONT SEAT CUSHION HEATER  INSPECTION  


PROCEDURE

Hide 71072S 1.INSPECT FRONT SEAT CUSHION HEATER LH (SEPARATE TYPE FRONT SEAT CUSHION COVER)

a.
U190822E01
0.154,0.069 0.321,0.221 0.167,0.152 10 *a 0.878,0.741 0.990,0.883 0.112,0.141 10 A 2.557,0.752 2.668,0.894 0.111,0.142 10 B

Measure the resistance according to the value(s) in the below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-2 - B-1 Always Below 1 Ω
A-2 - A-4 Always 4.05 to 4.85 Ω
A-2 - B-2 Always 4.33 to 5.19 Ω
B-1 - B-2 Always 4.33 to 5.19 Ω
B-2 - A-4 Always Below 1 Ω


Text in Illustration
*a Component without harness connected
(Front Seat Cushion Heater LH (Separate Type Front Seat Cushion Cover))

If the result is not as specified, replace the front seat cushion heater LH (separate type front seat cushion cover).


Hide 71071S 2.INSPECT FRONT SEAT CUSHION HEATER RH (SEPARATE TYPE FRONT SEAT CUSHION COVER)

a.
U190898E01
0.179,0.099 0.330,0.251 0.151,0.152 10 *a 0.861,0.33 0.974,0.486 0.113,0.156 10 A 2.494,0.33 2.607,0.486 0.113,0.156 10 B

Measure the resistance according to the value(s) in the below.

Standard Resistance:
Tester Connection Condition Specified Condition
A-1 - B-1 Always Below 1 Ω
A-1 - A-2 Always 4.05 to 4.85 Ω
A-1 - B-2 Always 4.33 to 5.19 Ω
B-1 - B-2 Always 4.33 to 5.19 Ω
B-2 - A-2 Always Below 1 Ω


Text in Illustration
*a Component without harness connected
(Front Seat Cushion Heater RH (Separate Type Front Seat Cushion Cover))

If the result is not as specified, replace the front seat cushion heater RH (separate type front seat cushion cover).