71940E
1.REMOVE NO. 2 SEAT HEADREST ASSEMBLY
71701B
2.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY RH
Disengage the fastener.
| *1 | Fastener |
| *2 | Rear No. 2 Seat Strap RH |
Disengage the 2 clips and 4 claws.
Disengage the 3 guides and remove the rear seatback board sub-assembly RH.
Pull out the rear No. 2 seat strap RH from the rear seatback board sub-assembly RH.
71931E
3.REMOVE REAR NO. 3 SEAT HEADREST SUPPORT ASSEMBLY RH
Disengage the 4 claws and remove the 2 rear No. 3 headrest support assembly RH.
72690
4.REMOVE SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY RH
Remove the screw.
Disengage the 2 claws.
Disengage the 2 cable clamps and remove the seat cushion lock release lever assembly RH.
5.REMOVE NO. 2 SEATBACK COVER WITH PAD RH
Disengage the 2 hooks.
Disengage the 11 hooks and remove the No. 2 seatback cover with pad RH.
79023
6.REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY RH
Remove the 3 hog rings.
Remove the 9 hog rings and No. 2 seatback cover sub-assembly RH from the No. 2 seatback pad sub-assembly RH.
71702B
7.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH
Disengage the fastener.
| *1 | Fastener |
| *2 | Rear No. 2 Seat Strap LH |
Disengage the 2 clips and 4 claws.
Disengage the 3 guides and remove the rear seatback board sub-assembly LH.
Pull out the rear No. 2 seat strap LH from the rear seatback board sub-assembly LH.
71931E
8.REMOVE REAR NO. 3 SEAT HEADREST SUPPORT ASSEMBLY LH
Disengage the 4 claws and remove the 2 rear No. 3 headrest support assembly LH.
72690
9.REMOVE SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH
Remove the screw.
Disengage the 2 claws.
Disengage the 2 cable clamps and remove the seat cushion lock release lever assembly LH.
10.REMOVE NO. 2 SEATBACK COVER WITH PAD LH
Disengage the 2 hooks.
Disengage the 11 hooks and remove the No. 2 seatback cover with pad LH.
79024
11.REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY LH
Remove the 3 hog rings.
Remove the 9 hog rings and No. 2 seatback cover sub-assembly LH from the No. 2 seatback pad sub-assembly LH.
71691E
12.REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER RH
Disengage the 2 claws and guide, and remove the rear No. 1 seat cushion hinge cover RH (outer).
Disengage the 2 claws and guide, and remove the rear No. 1 seat cushion hinge cover RH (inner).
13.REMOVE REAR NO. 2 SEAT CUSHION ASSEMBLY RH
Using a T45 "TORX" socket wrench, remove the 4 bolts and rear No. 2 seat cushion assembly RH.
72749
14.REMOVE REAR SEAT RECLINING SPACER RH
Remove the 4 rear seat reclining spacers RH.
15.REMOVE NO. 2 SEAT CUSHION COVER WITH PAD RH
Disengage the 2 fasteners.
| *1 | Fastener |
Disengage 2 fasteners and 7 hooks, and remove the No. 2 seat cushion cover with pad RH from the No. 2 seat cushion frame RH.
| *1 | Fastener |
79021
16.REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH
Remove the 2 hog rings.
Remove the 7 hog rings and No. 2 seat cushion cover sub-assembly RH from the No. 2 seat cushion pad sub-assembly RH.
71691E
17.REMOVE REAR NO. 1 SEAT CUSHION HINGE COVER LH
Disengage the 2 claws and guide, and remove the rear No. 1 seat cushion hinge cover LH (outer).
Disengage the 2 claws and guide, and remove the rear No. 1 seat cushion hinge cover LH (inner).
18.REMOVE REAR NO. 2 SEAT CUSHION ASSEMBLY LH
Using a T45 "TORX" socket wrench, remove the 4 bolts and rear No. 2 seat cushion assembly LH.
72749
19.REMOVE REAR SEAT RECLINING SPACER LH
Remove the 4 rear seat reclining spacers LH.
20.REMOVE NO. 2 SEAT CUSHION COVER WITH PAD LH
Disengage the 2 fasteners.
| *1 | Fastener |
Disengage 2 fasteners and 7 hooks, and remove the No. 2 seat cushion cover with pad LH from the No. 2 seat cushion frame LH.
| *1 | Fastener |
79022
21.REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH
Remove the 2 hog rings.
Remove the 7 hog rings and No. 2 seat cushion cover sub-assembly LH from the No. 2 seat cushion pad sub-assembly LH.
71811J
22.REMOVE RECLINING ADJUSTER COVER RH
Disengage the claw.
Disengage the 2 guides and remove the reclining adjuster cover RH as shown in the illustration.
71812E
23.REMOVE RECLINING ADJUSTER COVER LH
Disengage the claw.
Disengage the 2 guides and remove the reclining adjuster cover LH as shown in the illustration.
72927B
24.REMOVE REAR SEAT CUSHION UNDER COVER
Using a screwdriver with its tips wrapped with protective tape, disengage the 2 claws <A>.
| *1 | Protective Tape | - | - |
| *a | Claw <A> part | - | - |
Disengage the 2 claws <B>.
Disengage the 2 claws <C> and remove the rear seat cushion under cover.
71843A
25.REMOVE REAR NO. 2 SEAT RECLINING COVER RH
Remove the screw.
Disengage the guide and remove the No. 2 seat reclining cover RH.
71844A
26.REMOVE REAR NO. 2 SEAT RECLINING COVER LH
Remove the screw.
Disengage the guide and remove the No. 2 seat reclining cover LH.
79203A
27.REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY RH
Remove the nut and 2 bolts, and No. 2 seatback frame sub-assembly RH from the No. 2 seat leg.
79204A
28.REMOVE NO. 2 SEATBACK FRAME SUB-ASSEMBLY LH
Remove the nut and 2 bolts, and No. 2 seatback frame sub-assembly LH from the No. 2 seat leg.
71349E
29.REMOVE REAR SEATBACK HINGE COVER
Remove the screw.
Disengage the clamp and disconnect the seat belt wire harness.
Disengage the claw and remove the rear seatback hinge cover.
73580A
30.REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY RH
73580A
31.REMOVE REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY LH
72921
32.REMOVE REAR NO. 2 SEAT STRAP RH
Remove the rear No. 2 seat strap RH.
72921
33.REMOVE REAR NO. 2 SEAT STRAP LH
Remove the rear No. 2 seat strap LH.
71833E
34.REMOVE REAR NO. 3 SEAT RECLINING COVER RH
Remove the screw.
Disengage the guide and remove the rear No. 3 seat reclining cover RH.
71834C
35.REMOVE REAR NO. 3 SEAT RECLINING COVER LH
Remove the screw.
Disengage the guide and remove the rear No. 3 seat reclining cover LH.
72210F
36.REMOVE SEAT TRACK CONTROL CABLE ASSEMBLY RH
Disengage the 2 cable clamps and remove the seat track control cable assembly RH.
72210F
37.REMOVE SEAT TRACK CONTROL CABLE ASSEMBLY LH
Disengage the 2 cable clamps and remove the seat track control cable assembly LH.