Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY
RM2070E _58 Vehicle Interior _061944 SEAT _0301823 REAR NO. 2 SEAT ASSEMBLY A

SEAT  REAR NO. 2 SEAT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 72210F 1.INSTALL SEAT TRACK CONTROL CABLE ASSEMBLY RH

a.
B275704

Engage the 2 cable clamps to install the seat track control cable assembly RH to the No. 2 seatback frame sub-assembly RH.


Hide 72210F 2.INSTALL SEAT TRACK CONTROL CABLE ASSEMBLY LH

a.
B275705

Engage the 2 cable clamps to install the seat track control cable assembly LH to the No. 2 seatback frame sub-assembly LH.


Hide 71833E 3.INSTALL REAR NO. 3 SEAT RECLINING COVER RH

a.
B275703

Engage the guide to install the rear No. 3 seat reclining cover RH to the No. 2 seatback frame sub-assembly RH.


b.

Install the screw.


Hide 71834C 4.INSTALL REAR NO. 3 SEAT RECLINING COVER LH

a.
B275702

Engage the guide to install the rear No. 3 seat reclining cover LH to the No. 2 seatback frame sub-assembly LH.


b.

Install the screw.


Hide 72921 5.INSTALL REAR NO. 2 SEAT STRAP RH

a.
B275701

Install the rear No. 2 seat strap RH to the No. 2 seatback frame sub-assembly RH.


Hide 72921 6.INSTALL REAR NO. 2 SEAT STRAP LH

a.
B275700

Install the rear No. 2 seat strap LH to the No. 2 seatback frame sub-assembly LH.


Hide 73580A 7.INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY RH

Hide 73580A 8.INSTALL REAR NO. 2 SEAT INNER BELT SUB-ASSEMBLY LH

Hide 71349E 9.INSTALL REAR SEATBACK HINGE COVER

a.
B319380

Engage the claw to install the rear seatback hinge cover to the No. 2 seat leg.


b.

Engage the clamp to connect the seat belt wire harness.


c.

Install the screw.


Hide 79204A 10.INSTALL NO. 2 SEATBACK FRAME SUB-ASSEMBLY LH

a.
B275698

Install the No. 2 seatback frame sub-assembly LH to the No. 2 seat leg with the nut and 2 bolts.

Torque:
Nut : 14 N*m (143 kgf*cm, 10 ft.*lbf)
Bolt : 42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 79203A 11.INSTALL NO. 2 SEATBACK FRAME SUB-ASSEMBLY RH

a.
B275697

Install the No. 2 seatback frame sub-assembly RH to the No. 2 seat leg with the nut and 2 bolts.

Torque:
Nut : 14 N*m (143 kgf*cm, 10 ft.*lbf)
Bolt : 42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 71844A 12.INSTALL REAR NO. 2 SEAT RECLINING COVER LH

a.
B275696

Engage the guide to install the rear No. 2 seat reclining cover LH.


b.

Install the screw.


Hide 71843A 13.INSTALL REAR NO. 2 SEAT RECLINING COVER RH

a.
B275695

Engage the guide to install the rear No. 2 seat reclining cover RH.


b.

Install the screw.


Hide 72927B 14.INSTALL REAR SEAT CUSHION UNDER COVER

a.
B275694E02
1.438,1.083 1.719,1.25 0.281,0.167 10 true <A> 2,0.667 2.281,0.854 0.281,0.188 10 true <A> 1.917,1.177 2.198,1.344 0.281,0.167 10 true <A> 0.813,1.521 1.104,1.708 0.292,0.188 10 true <B> 1.219,1.833 1.542,2.01 0.323,0.177 10 true <B>

Engage the 3 claws <A>.


b.

Engage the 2 claws <B> to install the rear seat cushion under cover.


Hide 71812E 15.INSTALL RECLINING ADJUSTER COVER LH

a.
B275692

Engage the 2 guides and claw to install the reclining adjuster cover LH as shown in the illustration.


Hide 71811J 16.INSTALL RECLINING ADJUSTER COVER RH

a.
B275690

Engage the 2 guides and claw to install the reclining adjuster cover RH as shown in the illustration.


Hide 79022 17.INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH

a.
B275079

Using hog ring pliers, install the No. 2 seat cushion cover sub-assembly LH to the No. 2 seat cushion pad sub-assembly LH with 7 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




b.
B276636

Using hog ring pliers, install 2 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 18.INSTALL NO. 2 SEAT CUSHION COVER WITH PAD LH

a.
B275713E01
0.755,0.292 0.946,0.480 0.191,0.188 10 *1 0.404,0.565 0.744,0.408 false 2.082,0.316 2.272,0.505 0.191,0.188 10 *1 2.764,0.646 2.276,0.422 false

Engage 2 fasteners and 7 hooks to install the No. 2 seat cushion cover with pad LH to the No. 2 seat cushion frame LH.

Text in Illustration
*1 Fastener


b.
B275711E01
2.595,0.208 2.785,0.384 0.191,0.177 10 *1 0.889,0.478 0.889,0.289 0.889,0.289 2.573,0.289 false 2.296,0.5 2.296,0.289 false

Engage the 2 fasteners.

Text in Illustration
*1 Fastener


Hide 72749 19.INSTALL REAR SEAT RECLINING SPACER LH

a.
B315768

Install the 4 rear seat reclining spacers LH.


Hide 20.INSTALL REAR NO. 2 SEAT CUSHION ASSEMBLY LH

a.
B275688

Using a T45 "TORX" socket wrench, install the rear No. 2 seat cushion assembly LH to the No. 2 seat leg with the 4 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 71691E 21.INSTALL REAR NO. 1 SEAT CUSHION HINGE COVER LH

a.
B275686

Engage the guide and 2 claws to install the rear No. 1 seat cushion hinge cover LH (inner).


b.
B275684

Engage the guide and 2 claws to install the rear No. 1 seat cushion hinge cover LH (outer).


Hide 79021 22.INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY RH

a.
B275077

Using hog ring pliers, install the No. 2 seat cushion cover sub-assembly RH to the No. 2 seat cushion pad sub-assembly RH with 7 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




b.
B275715

Using hog ring pliers, install 2 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 23.INSTALL NO. 2 SEAT CUSHION COVER WITH PAD RH

a.
B275712E01
0.098,0.502 0.258,0.672 0.161,0.170 10 *1 0.547,0.639 0.279,0.597 false 2.614,0.34 2.775,0.510 0.161,0.170 10 *1 3.064,0.477 2.796,0.436 false

Engage the 2 fasteners and 7 hooks to install the No. 2 seat cushion cover with pad RH to the No. 2 seat cushion frame RH.

Text in Illustration
*1 Fastener


b.
B275710E01
0.509,0.216 0.718,0.375 0.209,0.159 10 *1 2.44,0.478 2.44,0.3 2.44,0.3 0.704,0.3 false 1.026,0.5 1.026,0.3 false

Engage the 2 fasteners.

Text in Illustration
*1 Fastener


Hide 72749 24.INSTALL REAR SEAT RECLINING SPACER RH

a.
B315769

Install the 4 rear seat reclining spacers RH.


Hide 25.INSTALL REAR NO. 2 SEAT CUSHION ASSEMBLY RH

a.
B275687

Using a T45 "TORX" socket wrench, install the rear No. 2 seat cushion assembly RH to the No. 2 seat leg with the 4 bolts.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


Hide 71691E 26.INSTALL REAR NO. 1 SEAT CUSHION HINGE COVER RH

a.
B275685

Engage the guide and 2 claws to install the rear No. 1 seat cushion hinge cover RH (inner).


b.
B275683

Engage the guide and 2 claws to install the rear No. 1 seat cushion hinge cover RH (outer).


Hide 79024 27.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY LH

a.
B275087

Using hog ring pliers, install the No. 2 seatback cover sub-assembly LH to the No. 2 seatback pad sub-assembly LH with 9 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




b.
B282526

Using hog ring pliers, install 3 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 28.INSTALL NO. 2 SEATBACK COVER WITH PAD LH

a.
B275682

Engage the 11 hooks to install the No. 2 seatback cover with pad LH.


b.
B275679

Engage the 2 hooks.


Hide 72690 29.INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY LH

a.
B275677

Engage the 2 cable clamps.


b.
B275675

Engage the 2 claws.


c.

Install the seat cushion lock release lever assembly LH with the screw.


Hide 71931E 30.INSTALL REAR NO. 3 SEAT HEADREST SUPPORT ASSEMBLY LH

a.
B275672

Engage the 4 claws to install the 2 rear No. 3 seat headrest support assemblies LH.


Hide 71702B 31.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY LH

a.
B319381E01
0.648,1.539 0.828,1.730 0.180,0.191 10 *2 0.959,1.509 0.834,1.614 false 2.004,2.694 2.184,2.885 0.180,0.191 10 *1 1.925,2.411 2.075,2.675 false

Pass the rear No. 2 seat strap LH through the rear seatback board sub-assembly LH.


b.

Engage the 3 guides.

Text in Illustration
*1 Fastener
*2 Rear No. 2 Seat Strap LH


c.

Engage the 4 claws and 2 clips to install the rear seatback board sub-assembly LH.


d.

Engage the fastener.


Hide 79023 32.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY RH

a.
B275085

Using hog ring pliers, install the No. 2 seatback cover sub-assembly RH to the No. 2 seatback pad sub-assembly RH with 9 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




b.
B282524

Using hog ring pliers, install 3 new hog rings.

NOTICE:
·

Be careful not to damage the cover.

·

When installing the hog rings, take care to minimize wrinkles as much as possible.




Hide 33.INSTALL NO. 2 SEATBACK COVER WITH PAD RH

a.
B275680

Engage the 11 hooks to install the No. 2 seatback cover with pad RH.


b.
B275678

Engage the 2 hooks.


Hide 72690 34.INSTALL SEAT CUSHION LOCK RELEASE LEVER ASSEMBLY RH

a.
B275676

Engage the 2 cable clamps.


b.
B275674

Engage the 2 claws.


c.

Install the seat cushion lock release lever assembly RH with the screw.


Hide 71931E 35.INSTALL REAR NO. 3 SEAT HEADREST SUPPORT ASSEMBLY RH

a.
B275672

Engage the 4 claws to install the 2 rear No. 3 seat headrest support assemblies RH.


Hide 71701B 36.INSTALL REAR SEATBACK BOARD SUB-ASSEMBLY RH

a.
B319382E01
3.015,0.973 3.195,1.163 0.180,0.191 10 *2 3.003,1.058 2.838,1.018 false 1.371,1.803 1.551,1.993 0.180,0.191 10 *1 1.237,2.076 1.397,1.929 false

Pass the rear No. 2 seat strap RH through the rear seatback board sub-assembly RH.


b.

Engage the 3 guides.

Text in Illustration
*1 Fastener
*2 Rear No. 2 Seat Strap RH


c.

Engage the 4 claws and 2 clips to install the rear seatback board sub-assembly RH.


d.

Engage the fastener.


Hide 71940E 37.INSTALL NO. 2 SEAT HEADREST ASSEMBLY