Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Power Seat) › from 2014.11
RM2070E _58 Vehicle Interior _061944 SEAT _0301824 FRONT SEAT ASSEMBLY(for Power Seat) G

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  INSPECTION  


PROCEDURE

Hide 71610S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY

a.
B161051E45
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the slide motor.

i.

Check if the front seat cushion moves smoothly when the auxiliary battery is connected to the slide motor connector terminals.

Text in Illustration
*a Component without harness connected
(Slide Motor (Separate Type Front Seat Cushion Spring Assembly))

OK:
Measurement Condition Operational Direction
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2
Forward
Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1
Backward


If the result is not as specified, replace the separate type front seat cushion spring assembly.



b.
B161051E45
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the lifter motor. (for Driver)

i.

Check if the front seat cushion moves smoothly when the auxiliary battery is connected to the lifter motor connector terminals.

Text in Illustration
*a Component without harness connected
(Lifter Motor (Separate Type Front Seat Cushion Spring Assembly))

OK:
Measurement Condition Operational Direction
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2
Upward
Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1
Downward


If the result is not as specified, replace the separate type front seat cushion spring assembly.



c.
B161051E45
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the front vertical motor. (for Driver)

i.

Check if the front seat cushion moves smoothly when the auxiliary battery is connected to the front vertical motor connector terminals.

Text in Illustration
*a Component without harness connected
(Front Vertical Motor (Separate Type Front Seat Cushion Spring Assembly))

OK:
Measurement Condition Operational Direction
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2
Upward
Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1
Downward


If the result is not as specified, replace the separate type front seat cushion spring assembly.



Hide 71630S 2.INSPECT SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY

a.
B161051E45
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the reclining motor.

i.

Check if the front seatback moves smoothly when the auxiliary battery is connected to the reclining motor connector terminals.

Text in Illustration
*a Component without harness connected
(Reclining Motor (Separate Type Front Seatback Spring Assembly))

OK:
Measurement Condition Operational Direction
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2
Forward
Auxiliary battery negative (+) → Terminal 2
Auxiliary battery positive (-) → Terminal 1
Rearward


If the result is not as specified, replace the separate type front seatback spring assembly.



b.
B161051E45
0.116,0.074 0.321,0.244 0.205,0.170 10 *a

Check the operation of the lumbar support adjuster assembly. (for Driver)

i.

Check that the front seatback moves smoothly when the auxiliary battery is connected to the lumbar support adjuster assembly connector terminals.

Text in Illustration
*a Component without harness connected
(Lumbar Support Adjuster Assembly (Separate Type Front Seatback Spring Assembly))

OK:
Measurement Condition Operational Direction
Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2
Seatback moves forward
Auxiliary battery positive (+) → Terminal 2
Auxiliary battery negative (-) → Terminal 1
Seatback moves backward


If the result is not as specified, replace the separate type front seatback spring assembly.