Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY
RM2070E _58 Vehicle Interior _061945 SEAT BELT _0301826 FRONT SEAT INNER BELT ASSEMBLY G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73240 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY (FOR DRIVER)

a.
B271232E04
0.205,0.166 0.357,0.303 0.151,0.137 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Driver seat belt unfastened Below 1 Ω
2 - 3 Driver seat belt fastened 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Front Seat Inner Belt Assembly (for Driver))

If the result is not as specified, replace the front seat inner belt assembly (for Driver).


Hide 73230 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY (FOR FRONT PASSENGER)

a.
U190849E02
0.177,0.104 0.333,0.406 0.156,0.302 10 false *a 1.146,0.625 1.458,0.792 0.313,0.167 10 false S23 1.479,0.635 1.792,0.813 0.313,0.177 10 false *A 1.854,0.625 2.167,0.802 0.313,0.177 10 false R33 2.208,0.635 2.51,0.833 0.302,0.198 10 false *B 1.677,2.917 1.844,3.188 0.167,0.271 10 false B

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
for LHD
Tester Connection Condition Specified Condition
S23-3 - B-1 Always Below 1 Ω
S23-2 - B-3 Front passenger seat belt unfastened Below 1 Ω
S23-2 - B-3 Front passenger seat belt fastened 10 kΩ or higher

for RHD
Tester Connection Condition Specified Condition
R33-3 - B-1 Always Below 1 Ω
R33-2 - B-3 Front passenger seat belt unfastened Below 1 Ω
R33-2 - B-3 Front passenger seat belt fastened 10 kΩ or higher


Text in Illustration
*A for LHD
*B for RHD
*a Component without harness connected
(Front Seat Inner Belt Assembly (for Front Passenger))

If the result is not as specified, replace the front seat inner belt assembly (for Front Passenger).