Home › Vehicle Interior › SEAT BELT › REAR NO. 1 SEAT OUTER BELT ASSEMBLY
RM2070E _58 Vehicle Interior _061945 SEAT BELT _0301828 REAR NO. 1 SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR NO. 1 SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73370C 1.INSPECT REAR NO. 1 SEAT OUTER BELT ASSEMBLY

a.
B273817E01
2.164,0 2.319,0.142 0.155,0.142 10 *a 2.385,1.702 2.534,1.839 0.150,0.137 10 *1 0.449,0.917 0.607,1.054 0.158,0.137 10 *b 1.316,0.258 1.459,0.398 0.143,0.140 10 *c 1.802,1.684 2.323,1.684 2.323,1.684 2.275,1.292 false

Before installing the rear No. 1 seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

Text in Illustration
*1 Retractor
*a Unlocked
*b Locked
*c 45°

If the result is not as specified, replace the rear No. 1 seat outer belt assembly.