Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY
RM2070E _58 Vehicle Interior _061945 SEAT BELT _0301829 REAR CENTER SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 73350 1.INSPECT REAR SEAT CENTER LAP TYPE BELT ASSEMBLY

a.
B274543E02
0.592,0.468 0.746,0.610 0.155,0.142 10 *a 3.197,0.594 3.346,0.731 0.150,0.137 10 *1 1.27,1.948 1.428,2.085 0.158,0.137 10 *b 1.097,1.244 1.240,1.384 0.143,0.140 10 *c 2.623,0.689 3.113,0.689 3.113,0.689 2.971,1.196 false

Before installing the rear seat center lap type belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.


i.

When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

Text in Illustration
*1 Retractor
*a Unlocked
*b Locked
*c 45°

If the result is not as specified, replace the rear seat center lap type belt assembly.