Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR
RM2070E _58 Vehicle Interior _061945 SEAT BELT _0301831 OCCUPANT DETECTION SENSOR G

SEAT BELT  OCCUPANT DETECTION SENSOR  INSPECTION  


PROCEDURE

Hide 71511S 1.INSPECT OCCUPANT DETECTION SENSOR (SEPARATE TYPE FRONT SEAT CUSHION PAD)

a.
B218574E01
0.146,0.125 0.303,0.276 0.157,0.151 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 3 Front passenger seat occupied Below 100 Ω
1 - 3 Front passenger seat not occupied 1 MΩ or higher


Text in Illustration
*a Component without harness connected
(Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))

If the result is not as specified, replace the occupant detection sensor (separate type front seat cushion pad).