73590
1.INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY LH
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 4 | Rear No. 2 seat belt LH not fastened | Below 1 Ω |
| 3 - 4 | Rear No. 2 seat belt LH fastened | 10 kΩ or higher |
| *a | Component without harness connected
(Rear No. 2 Seat Inner Belt Assembly LH) |
If the result is not as specified, replace the rear No. 2 seat inner belt assembly LH.
73580
2.INSPECT REAR NO. 2 SEAT INNER BELT ASSEMBLY RH
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A-1 - A-2 | Rear No. 2 seat belt RH not fastened | Below 1 Ω |
| A-1 - A-2 | Rear No. 2 seat belt RH fastened | 10 kΩ or higher |
| A-3 - B-3 | Always | Below 1 Ω |
| A-4 - B-4 | Always | Below 1 Ω |
| *a | Component without harness connected
(Rear No. 2 Seat Inner Belt Assembly RH) |
If the result is not as specified, replace the rear No. 2 seat inner belt assembly RH.