Home › Vehicle Interior › SEAT BELT › REAR NO. 2 SEAT OUTER BELT ASSEMBLY
RM2070E _58 Vehicle Interior _061945 SEAT BELT _0301833 REAR NO. 2 SEAT OUTER BELT ASSEMBLY G

SEAT BELT  REAR NO. 2 SEAT OUTER BELT ASSEMBLY  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedure for the rear No. 2 seat outer belt assembly.


PROCEDURE

Hide 73570 1.INSPECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision)

a.

Visually check for defects with the rear No. 2 seat outer belt assembly installed on the vehicle.

i.

The defects are as follows:

·

Cuts on the rear No. 2 seat outer belt assembly

·

Small cracks on the rear No. 2 seat outer belt assembly

·

Significant discoloration on the rear No. 2 seat outer belt assembly


OK:

No defects are found.


HINT:

If any of the defects is found, replace the rear No. 2 seat outer belt assembly with a new one.




Hide 73570 2.INSPECT REAR NO. 2 SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision)

a.

Visually check for defects with the rear No. 2 seat outer belt assembly removed from the vehicle.

i.

The defects are as follows:

·

Cuts on the rear No. 2 seat outer belt assembly

·

Small cracks on the rear No. 2 seat outer belt assembly

·

Significant discoloration on the rear No. 2 seat outer belt assembly

·

Cracks or other damage to the connector


OK:

No defects are found.


HINT:

If any of the defects is found, replace the rear No. 2 seat outer belt assembly with a new one.