73390
1.INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Rear No. 1 seat belt LH not fastened | Below 1 Ω |
| 1 - 2 | Rear No. 1 seat belt LH fastened | 10 kΩ or higher |
| *a | Component without harness connected
(Rear Seat 3 Point Type Belt Assembly LH) |
If the result is not as specified, replace the rear seat 3 point type belt assembly LH.