Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM
RM2070E _58 Vehicle Interior _061945 SEAT BELT _0301836 SEAT BELT WARNING SYSTEM A

SEAT BELT  SEAT BELT WARNING SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE SEAT BELT WARNING SYSTEM

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.

·

These buzzers should be ON for safe driving. Perform this procedure only if it is necessary to set the buzzer to OFF (disabled).



a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the power switch on (IG).


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Warning.


v.

Select the setting by referring to the table below.

Display Default Content Setting Relevant ECU
Driver Side Seatbelt Warning Buzzer ON Function to sound the driver seat belt warning buzzer OFF/ON Combination meter sub-assembly
Front Passenger Side Seatbelt Warning Buzzer ON Function to sound the front passenger seat belt warning buzzer OFF/ON
Rear Seatbelt Warning Buzzer ON Function to sound the rear seat belt warning buzzer OFF/ON

HINT:

This setting is only valid when the vehicle is driven at 20 km/h (12 mph) or more.