87710G
1.INSPECT QUICK HEATER ASSEMBLY
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| A19-3 - A20-2 | Always | Below 1 Ω |
| A19-2 - A20-2 | Always | Below 1 Ω |
| A19-2 - A20-1 | Always | Below 1 Ω |
| A19-1 - A20-1 | Always | Below 1 Ω |
| *a | Component without harness connected
(Quick Heater Assembly) |
If the result is not as specified, replace the quick heater assembly.