Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF SUNSHADE SYSTEM
RM2070E _58 Vehicle Interior _061948 INTERIOR PANELS / TRIM _0301863 ROOF SUNSHADE SYSTEM D

INTERIOR PANELS / TRIM  ROOF SUNSHADE SYSTEM  SYSTEM DESCRIPTION  


GENERAL


This system has the following functions: manual open and close; auto open and close; jam protection; door lock linked close function.


FUNCTION OF MAIN COMPONENT


Component Outline
Roof sunshade ECU (Sliding roof drive gear assembly) Roof sunshade ECU (sliding roof drive gear assembly) controls the rotational direction of the motor.
Roof sunshade switch (Map light assembly) Roof sunshade switch (map light assembly) sends operation signals to the roof sunshade ECU (sliding roof drive gear assembly).


SYSTEM OPERATION


The roof sunshade system has the following features.

Function Outline
Manual open and close This function causes roof sunshade to open (or close) when OPEN switch (or CLOSE switch) is pressed for a maximum of 0.3 seconds. Roof sunshade stops as soon as switch is released.
Auto open and close This function causes roof sunshade to be fully open (or closed) when OPEN switch (or CLOSE switch) is pressed for a minimum of 0.3 seconds.
Jam protection The jam protection function automatically stops the roof sunshade and moves it open half way or fully open position if a foreign object gets jammed in the roof sunshade during close operation.
Door lock linked close function When the wireless door lock function, key-linked door lock function or entry door lock function is operated with the power switch off, the roof sunshade ECU (sliding roof drive gear assembly) activates the roof sunshade motor to close until it is fully closed.