Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR OPENER SWITCH
RM2070E _59 Vehicle Exterior _061950 DOOR / HATCH _0301882 BACK DOOR OPENER SWITCH G

DOOR / HATCH  BACK DOOR OPENER SWITCH  INSPECTION  


PROCEDURE

Hide 84840G 1.INSPECT BACK DOOR OPENER SWITCH ASSEMBLY

a.

Check the operation of the opener switch.

i.
B142645E10
1.718,1.399 2.197,1.843 false 1.008,1.848 1.487,1.404 false 2.22,1.865 2.378,2.015 0.157,0.150 10 E 0.18,0.164 0.338,0.315 0.157,0.151 10 *a 0.774,1.865 0.986,2.015 0.212,0.150 10 UL

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
2 (E) - 3 (UL) Back door opener switch not pushed 10 kΩ or higher
2 (E) - 3 (UL) Back door opener switch pushed Below 1 Ω


Text in Illustration
*a Component without harness connected
(Back Door Opener Switch Assembly)

If the result is not specified, replace the back door opener switch assembly.



b.

Check operation of the lock switch (w/ Entry Back Door Open).

i.
B142645E11
1.948,1.399 2.427,1.843 false 1.231,1.848 1.71,1.404 false 2.433,1.865 2.590,2.015 0.157,0.150 10 L 0.18,0.164 0.338,0.315 0.157,0.151 10 *a 1.118,1.865 1.232,2.015 0.114,0.150 10 E

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Position Specified Condition
1 (L) - 2 (E) Back door lock switch not pushed 10 kΩ or higher
1 (L) - 2 (E) Back door lock switch pushed Below 1 Ω


Text in Illustration
*a Component without harness connected
(Back Door Opener Switch Assembly)

If the result is not specified, replace the back door opener switch assembly.