Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM2070E _59 Vehicle Exterior _061950 DOOR / HATCH _0301883 BACK DOOR SUPPORT N

DOOR / HATCH  BACK DOOR SUPPORT  DISPOSAL  


PROCEDURE

Hide 68960 1.DISPOSE OF BACK DOOR STAY ASSEMBLY

a.

Secure the back door stay assembly horizontally in a vise with the piston rod pulled out.


b.
B127037E06
1.898,1.371 2.022,1.518 0.124,0.147 10 A 2.949,1.364 3.076,1.520 0.127,0.156 10 B

Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown in the illustration to release the gas.

Area Measurement
A-B 50 mm (1.97 in.)

NOTICE:

Although the gas inside the back door stay assembly is colorless, odorless and harmless, metal debris may scatter. Therefore, cover the back door stay assembly with a piece of cloth or other material.