Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR SUPPORT
RM2070E _59 Vehicle Exterior _061950 DOOR / HATCH _0301883 BACK DOOR SUPPORT A

DOOR / HATCH  BACK DOOR SUPPORT  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for both the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 68960 1.REMOVE BACK DOOR STAY ASSEMBLY

NOTICE:
·

Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

·

Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

·

Do not apply any horizontal load to the door stay in order to prevent the piston rod from deforming.



a.
B275242E03
0.948,1.521 0.74,1.229 false 0.885,1.521 1.042,1.677 0.156,0.156 10 true *1 0.24,1.146 0.438,1.333 0.198,0.188 10 true (1) 0.344,0.833 0.542,1.021 0.198,0.188 10 true (2)

Using a screwdriver, remove the 2 stop rings as indicated by the arrows, in the order shown in the illustration.

Text in Illustration
*1 Protective Tape

HINT:

Tape the screwdriver tip before use.



b.

Release the ball joint and remove the back door stay assembly.

NOTICE:

Remove the back door stay assembly while supporting the back door by hand.



Hide 68961 2.REMOVE BACK DOOR STAY BOLT

a.
B275244

Remove the back door stay bolt.


Hide 68945 3.REMOVE BACK DOOR UPPER DAMPER STAY BRACKET

a.
B318628

Remove the 2 bolts and back door upper damper stay bracket.