85222A
1.REMOVE FRONT WIPER BLADE
Disengage the holder of the front wiper blade as shown in the illustration.
| *1 | Holder |
Remove the front wiper blade from the front wiper arm as shown in the illustration.
Do not lower the front wiper arm with the front wiper blade removed. The arm tip may damage the windshield surface.
85214B
2.REMOVE WIPER RUBBER
Disengage the 2 claws and remove the wiper rubber with the wiper rubber backing plates from the front wiper blade as shown in the illustration.
Remove the 2 front wiper rubber backing plates from the wiper rubber.
85214B
3.INSTALL WIPER RUBBER
Install the 2 front wiper rubber backing plates to a new wiper rubber.
Align the protrusions on the wiper rubber and the notches of the backing plates.
Insert the wiper rubber from the rear of the front wiper blade as shown in the illustration.
| *a | Rear of the Rear Wiper Blade |
Engage the 2 claws to install the wiper rubber.
Push the wiper rubber into the wiper blade strongly to engage them securely.
85222A
4.INSTALL FRONT WIPER BLADE
Engage the front wiper blade as shown in the illustration.
| *1 | Holder |
Install the holder of the front wiper blade as shown in the illustration.