Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH
RM2070E _59 Vehicle Exterior _061952 WIPER / WASHER _0301896 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  INSTALLATION  


PROCEDURE

Hide 84650 1.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

a.
E228921

Engage the claw and install the windshield wiper switch assembly as shown in the illustration.


b.

Connect the 2 connectors.


Hide 45286 2.INSTALL STEERING COLUMN COVER

NOTICE:

If the lower steering column cover is installed in the incorrect order, it will not be possible to assemble the lower steering column cover.


a.
E228922

Engage the claw and 2 pins to install the upper steering column cover.


b.
E228923

Engage the 2 claws to install the lower steering column cover.


c.

Engage the 4 claws.


d.

Engage the claw.

HINT:

Press the area around the claw to engage it.