Home › Vehicle Exterior › WIPER / WASHER › WASHER MOTOR(for Rear Side)
RM2070E _59 Vehicle Exterior _061952 WIPER / WASHER _0301898 WASHER MOTOR(for Rear Side) G

WIPER / WASHER  WASHER MOTOR(for Rear Side)  INSPECTION  


PROCEDURE

Hide 85330F 1.INSPECT REAR WASHER MOTOR AND PUMP ASSEMBLY

a.

Remove the washer jar.


b.

Disconnect the rear washer motor and pump connector.

HINT:

The check should be performed with the rear washer motor and pump installed on the washer jar.



c.

Fill the washer jar with washer fluid.


d.
E140350E09
0.288,0.238 0.468,0.376 0.180,0.139 10 *a

Connect a auxiliary battery positive (+) lead to terminal 1 of the rear washer motor and pump, and a negative (-) lead to terminal 2.


e.

Check that washer fluid flows from the washer jar.

OK:

Washer fluid flows from the washer jar.


Text in Illustration
*a Component without harness connected
(Rear Washer Motor and Pump Assembly)

If the result is not as specified, replace the rear washer motor and pump assembly.