Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Front Side)
RM2070E _59 Vehicle Exterior _061952 WIPER / WASHER _0301899 WASHER NOZZLE(for Front Side) G

WIPER / WASHER  WASHER NOZZLE(for Front Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85035 1.INSPECT WASHER NOZZLE SUB-ASSEMBLY

a.

With the power switch on (IG), check the position that the washer fluid hits the windshield.

Standard:

Washer fluid hits the windshield in the areas shown in the illustration.


E228883E02
3.544,0.583 3.668,0.740 0.123,0.157 10 A 3.544,6.047 3.668,6.204 0.123,0.157 10 D 6.589,3.579 6.712,3.736 0.123,0.157 10 B 4.615,4.169 4.738,4.326 0.123,0.157 10 C 4.655,2.84 4.823,3.017 0.168,0.178 10 *a 4.645,3.382 4.813,3.559 0.168,0.178 10 *b 5.651,3.82 5.819,3.998 0.168,0.178 10 *c 2.074,2.921 2.301,2.921 false 2.163,3.46 2.367,3.46 false 1.819,3.898 1.631,3.898 false 2.306,2.84 2.474,3.017 0.168,0.178 10 *a 2.387,3.382 2.555,3.559 0.168,0.178 10 *b 1.457,3.82 1.625,3.998 0.168,0.178 10 *c 5.359,3.909 5.666,3.909 false 5.021,3.453 4.786,3.453 false 5.109,2.914 4.796,2.914 false

Standard Clearance
Area Measurement Area Measurement
A 439.6 mm (1.44 ft.) B 533.7 mm (1.75 ft.)
C 239 mm (9.409 in.) D 25.3 mm (0.996 in.)

Text in Illustration
*a Upper Limit *b Standard
*c Lower Limit - -

HINT:

If the result is not as specified, replace the malfunctioning washer nozzle sub-assembly.