Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Rear Side)
RM2070E _59 Vehicle Exterior _061952 WIPER / WASHER _0301900 WASHER NOZZLE(for Rear Side) G

WIPER / WASHER  WASHER NOZZLE(for Rear Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85345R 1.INSPECT REAR WASHER NOZZLE

a.

With the power switch on (IG), check that the center stream of washer fluid sprays on the windshield within the hatched area shown in the illustration.

Standard:

Washer fluid hits the windshield in the area shown in the illustration.


E223654E03
3.104,1.125 3.25,1.26 0.146,0.135 10 false A 2.448,1.698 2.594,1.917 0.146,0.219 10 true B 3.802,1.75 3.969,1.948 0.167,0.198 10 true C 4.219,1.844 4.365,1.979 0.146,0.135 10 false D

Standard Clearance
Area Measurement
A 12.5 mm (0.492 in.)
B 2.5 mm (0.0984 in.)
C 25.7 mm (1.01 in.)
D 47.8 mm (1.88 in.)

HINT:

If the result is not as specified, replace the malfunctioning rear washer nozzle.