DESCRIPTION
Lighting system data and the Diagnostic Trouble Codes (DTCs) can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctioning, use the GTS to check for malfunctions and to repair.
CHECK DLC3
Check the DLC3 (See page General>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION).
INSPECT AUXILIARY BATTERY VOLTAGE
Measure the auxiliary battery voltage with the power switch off.
11 to 14 V
If the voltage is below 11 V, recharge or replace the auxiliary battery.
LED HEADLIGHT SYSTEM
If the LED head light system malfunctions, "CHECK HEADLIGHT SYSTEM" is displayed on the multi-information display.
In this case, the main body ECU (multiplex network body ECU) stores DTCs (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>DTC CHECK / CLEAR).
When the system returns to normal, "CHECK HEADLIGHT SYSTEM" is no longer displayed on the multi-information display.
AUTOMATIC HIGH BEAM SYSTEM
If the automatic high beam system malfunctions, the automatic high beam indicator light turns off and "HEADLIGHT SYSTEM MALFUNCTION VISIT YOUR DEALER" is displayed on the multi-information display.
In this case, the main body ECU (multiplex network body ECU) stores DTCs (See page Vehicle Exterior>LIGHTING (EXT)>LIGHTING SYSTEM>DTC CHECK / CLEAR).
When the system returns to normal, "HEADLIGHT SYSTEM MALFUNCTION VISIT YOUR DEALER" is no longer displayed on the multi-information display.