Home › Vehicle Exterior › LIGHTING (EXT) › HEADLIGHT ASSEMBLY › from 2014.11
RM2070E _59 Vehicle Exterior _061953 LIGHTING (EXT) _0301909 HEADLIGHT ASSEMBLY A

LIGHTING (EXT)  HEADLIGHT ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 81110D 1.REMOVE NO. 2 HEADLIGHT BULB (for Halogen Headlight)

a.
E304351

Turn the No. 2 headlight bulb as shown in the illustration to remove it.

NOTICE:

Do not touch the bulb glass.



Hide 81179 2.REMOVE HEADLIGHT SOCKET COVER (for Halogen Headlight)

a.
E304355

Remove the headlight socket cover.


Hide 81110B 3.REMOVE NO. 1 HEADLIGHT BULB (for Halogen Headlight)

a.
E304357

Turn the headlight back cover as shown in the illustration to separate it.


b.
E304361

Turn the No. 1 headlight bulb as shown in the illustration to remove it with the headlight back cover.

NOTICE:

Do not touch the bulb glass.



c.
E304365

Disconnect the connector to remove the No. 1 headlight bulb from the headlight back cover.

NOTICE:

Do not touch the bulb glass.



Hide 81610F 4.REMOVE CLEARANCE LIGHT BULB (for Halogen Headlight)

a.
E304366

Turn the headlight cord with the clearance light bulb as shown in the illustration to disconnect them as a unit.


b.

Remove the clearance light bulb from the headlight cord.


Hide 81510C 5.REMOVE FRONT TURN SIGNAL LIGHT BULB

a.
E304368

Turn the headlight cord with the front turn signal light bulb as shown in the illustration to disconnect them as a unit.


b.

Remove the front turn signal light bulb from the headlight cord.


Hide 81125 6.REMOVE HEADLIGHT CORD (for Halogen Headlight)

a.
E304374

Disengage each clamp and remove the headlight cord.


Hide 81125 7.REMOVE HEADLIGHT CORD (for LED Headlight)

a.
E307059

Disconnect the connector to remove the headlight cord.


Hide 85662 8.REMOVE HEADLIGHT LEVELING MOTOR

a.

for LED Headlight:

i.

Disconnect the connector.



b.
E304370E02
1.865,1.042 2.542,0.823 false 2.604,0.708 2.792,0.917 0.188,0.208 10 true *a 1.323,0.75 1.552,0.927 0.229,0.177 10 true 1 2.125,1.76 2.344,1.969 0.219,0.208 10 true 2

Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.

Text in Illustration
*a Aiming Screw

HINT:
·

Turn the aiming screw until the headlight leveling motor can be moved in the direction indicated by the arrow (2) shown in the illustration.

·

Make sure to remember the number of aiming screw rotations.




c.

Turn the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to disengage the pin.

HINT:

When removing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction of the arrow (2) shown in the illustration.



d.
E304372E02
1.865,1.031 2.479,0.75 true 2.531,0.635 2.708,0.813 0.177,0.177 10 true *a 1.354,0.75 1.531,0.927 0.177,0.177 10 true 3 1.865,1.74 2.042,1.917 0.177,0.177 10 true 4

Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration to disengage the shaft.

Text in Illustration
*a Aiming Screw

HINT:

Make sure to remember the number of aiming screw rotations.



e.

Pull out the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to remove it.


Hide 85669 9.REMOVE HEADLIGHT LEVELING MOTOR BASE PACKING

a.

Remove the headlight leveling motor base packing.

NOTICE:

After the headlight leveling motor base packing is removed, be sure to replace it with a new one. Failure to do this may cause water ingress.



Hide 52126E 10.REMOVE FRONT BUMPER REINFORCEMENT EXTENSION

a.
E307032

Remove the 3 screws and front bumper reinforcement extension.


Hide 81112B 11.REMOVE COVER RING (for LED Headlight)

a.
E307057

Turn the cover ring as shown in the illustration to remove it.