81134
1.INSTALL HEADLIGHT GASKET (for LED Headlight)
Install a new headlight gasket.
81108
2.INSTALL HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY (for LED Headlight)
Connect the 2 connectors.
Install the headlight light control ECU sub-assembly to the headlight unit with the 4 screws.
85669
3.INSTALL HEADLIGHT LEVELING MOTOR BASE PACKING
Install a new headlight leveling motor base packing.
85662
4.INSTALL HEADLIGHT LEVELING MOTOR
Insert the headlight leveling motor in the direction indicated by the arrow (1) shown in the illustration.
Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (2) shown in the illustration to engage the shaft.
| *1 | Aiming Screw |
Turn the aiming screw the same number of times as it was turned during removal.
Turn the headlight leveling motor in the direction indicated by the arrow (3) shown in the illustration.
When installing the headlight leveling motor of the headlight assembly RH, turn the headlight leveling motor in the opposite direction indicated by the arrow (3) shown in the illustration.
Turn the aiming screw of the headlight leveling motor in the direction indicated by the arrow (4) shown in the illustration to install it.
| *1 | Aiming Screw |
Turn the aiming screw the same number of times as it was turned during removal.
81125
5.INSTALL HEADLIGHT CORD (for Halogen Headlight)
Engage the clamp to install the headlight cord.
81610F
6.INSTALL CLEARANCE LIGHT BULB
Install the clearance light bulb to the headlight cord.
Turn the headlight cord with the clearance light bulb in the direction indicated by the arrow shown in the illustration and install them as a unit.
81179
7.INSTALL HEADLIGHT SOCKET COVER
for Halogen Headlight:
Install the 2 headlight socket covers.
for LED Headlight:
Install the headlight socket cover.
81110D
8.INSTALL NO. 2 HEADLIGHT BULB (for Halogen Headlight)
Turn the No. 2 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.
Do not touch the bulb glass.
81110B
9.INSTALL NO. 1 HEADLIGHT BULB
Turn the No. 1 headlight bulb in the direction indicated by the arrow shown in the illustration to install it.
Do not touch the bulb glass.