Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY
RM2070E _59 Vehicle Exterior _061953 LIGHTING (EXT) _0301912 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 81565 1.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

a.
E222938

Engage the claw.


b.

Connect the connector to install the rear combination light socket and wire sub-assembly.


Hide 81550Q 2.INSTALL REAR NO. 1 FOG LIGHT BULB (for LH Side)

a.

Install the rear No. 1 fog light blub to the rear combination light socket and wire sub-assembly.


b.
E222935

Turn the rear combination light socket and wire sub-assembly with the rear No. 1 fog light blub in the direction indicated by the arrow shown in the illustration to connect them as a unit.


Hide 81550N 3.INSTALL BACK-UP LIGHT BULB (for RH Side)

a.

Install the back-up light bulb to the rear combination light socket and wire sub-assembly.


b.
E222937

Turn the rear combination light socket and wire sub-assembly with the back-up light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.


Hide 81550L 4.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb to the rear combination light socket and wire sub-assembly.


b.
E222933

Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to connect them as a unit.


Hide 81562A 5.INSTALL REAR COMBINATION LIGHT GASKET

a.
E222931

Install a new rear combination light gasket.


Hide 81564 6.INSTALL REAR COMBINATION LIGHT BODY GASKET

a.
E222930

Install 2 new rear combination light body gaskets.