Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH › 2012.03–2014.11
RM2070E _59 Vehicle Exterior _061953 LIGHTING (EXT) _0301917 STOP LIGHT SWITCH G

LIGHTING (EXT)  STOP LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.
E182485E08
0.186,0.123 0.358,0.281 0.171,0.159 10 *a

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Pushed 10 kΩ or higher
Not pushed Below 1 Ω
3 - 4 Pushed Below 1 Ω
Not pushed 10 kΩ or higher


Text in Illustration
*a Component without harness connected
(Stop Light Switch Assembly)

If the result is not as specified, replace the stop light switch assembly.