Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT CONTROL RELAY › 2012.03–2014.11
RM2070E _59 Vehicle Exterior _061953 LIGHTING (EXT) _0301921 STOP LIGHT CONTROL RELAY A

LIGHTING (EXT)  STOP LIGHT CONTROL RELAY  INSTALLATION  


PROCEDURE

Hide 895A0A 1.INSTALL STOP LIGHT CONTROL ECU ASSEMBLY

a.

Connect the connector.


b.

Engage the clamp to install the stop light control ECU assembly.

NOTICE:
·

Do not drop the stop light control ECU assembly. If it is dropped, replace it with a new one.

·

When installing the stop light control ECU assembly, do not subject it to impacts.




Hide 55480D 2.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY