81440B
1.INSPECT DAYTIME RUNNING LIGHT ASSEMBLY LH
Connect a positive (+) lead from the auxiliary battery to terminal 2 and a negative (-) lead to terminal 1.
Check that the light comes on.
The light comes on.
| *a | Component without harness connected
(Daytime Running Light Assembly LH) |
If the result is not as specified, replace the daytime running light assembly.
81430C
2.INSPECT DAYTIME RUNNING LIGHT ASSEMBLY RH
Connect a positive (+) lead from the auxiliary battery to terminal 2 and a negative (-) lead to terminal 1.
Check that the light comes on.
The light comes on.
| *a | Component without harness connected
(Daytime Running Light Assembly RH) |
If the result is not as specified, replace the daytime running light assembly.