Home › Vehicle Exterior › HORN › HORN
RM2070E _59 Vehicle Exterior _061954 HORN _0301928 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86520 1.INSPECT LOW PITCHED HORN ASSEMBLY

a.
E190231E01
0.119,0.113 0.330,0.366 0.211,0.253 10 *a 1.322,0.603 1.457,0.763 0.135,0.159 10 1 1.436,0.693 1.693,0.693 1.693,0.693 1.848,1.114 false

Apply auxiliary battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (B)
Auxiliary battery negative (-) → Body ground
Horn sounds


Text in Illustration
*a Component without harness connected
(Low Pitched Horn Assembly)

If the result is not as specified, replace the low pitched horn assembly.


Hide 86510 2.INSPECT HIGH PITCHED HORN ASSEMBLY

a.
E190231E01
0.119,0.113 0.330,0.366 0.211,0.253 10 *a 1.322,0.603 1.457,0.763 0.135,0.159 10 1 1.436,0.693 1.693,0.693 1.693,0.693 1.848,1.114 false

Apply auxiliary battery voltage and check the operation of the horn according to the table below.

OK:
Measurement Condition Specified Condition
Auxiliary battery positive (+) → Terminal 1 (B)
Auxiliary battery negative (-) → Body ground
Horn sounds


Text in Illustration
*a Component without harness connected
(High Pitched Horn Assembly)

If the result is not as specified, replace the high pitched horn assembly.