Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2012.03–2014.11
RM2070E _59 Vehicle Exterior _061955 EXTERIOR PANELS / TRIM _0301931 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BUMPER ASSEMBLY

a.
B274684

Engage the 4 claws to install the rear bumper assembly.


b.
B274687

Engage the 5 claws.

HINT:

Use the same procedure for the RH side and LH side.



c.

Engage the 4 claws.


d.

Install the 2 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


e.

Install the 2 bolts.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


f.

Install the rear bumper assembly with the 4 clips.


Hide 2. BUMPER POSITION SETTING (w/ Advanced Parking Guidance System)