Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › from 2014.11
RM2070E _59 Vehicle Exterior _061955 EXTERIOR PANELS / TRIM _0301931 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REMOVAL  


PROCEDURE

Hide 1.REMOVE REAR BUMPER ASSEMBLY

a.
B393156

Apply protective tape around the rear bumper assembly as shown in the illustration.

Text in Illustration
V100155

Protective Tape


b.
B393157

Remove the 2 bolts.


c.
B393158

Using a clip remover, remove the 4 clips.


d.
B393159

Remove the screw.

HINT:

Use the same procedure for the RH side and LH side.



e.

Disengage the 2 claws.

HINT:

Use the same procedure for the RH side and LH side.



f.
B393160

Disengage the 5 claws.

HINT:

Use the same procedure for the RH side and LH side.



g.
B393161

Disengage the 4 claws and remove the rear bumper assembly as shown in the illustration.