Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER › 2012.03–2014.11
RM2070E _59 Vehicle Exterior _061955 EXTERIOR PANELS / TRIM _0301931 REAR BUMPER A

EXTERIOR PANELS / TRIM  REAR BUMPER  REASSEMBLY  


PROCEDURE

Hide 52016A 1.INSTALL REAR BUMPER ARM SUB-ASSEMBLY LH

a.
B314754

Install the rear bumper arm sub-assembly LH with the 3 bolts.

Torque:
12 N*m (117 kgf*cm, 8 ft.*lbf)


Hide 52015A 2.INSTALL REAR BUMPER ARM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.


Hide 52171A 3.INSTALL NO. 1 REAR BUMPER REINFORCEMENT

a.
B314755

Install the No. 1 rear bumper reinforcement with the 8 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


Hide 52576 4.INSTALL REAR BUMPER SIDE RETAINER LH

a.
B274689

Engage the 2 claws to install the rear bumper side retainer LH.


b.

Install the screw.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 52575 5.INSTALL REAR BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.


Hide 52156A 6.INSTALL REAR BUMPER SIDE SUPPORT LH

a.
B274688

Engage the 4 claws.


b.

Install the rear bumper side support LH with the 2 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 52155A 7.INSTALL REAR BUMPER SIDE SUPPORT RH

HINT:

Use the same procedure as for the LH side.


Hide 81920 8.INSTALL REFLEX REFLECTOR ASSEMBLY LH

a.
B274690

Engage the 2 claws.


b.

Install the reflex reflector assembly LH with the screw.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


Hide 81910 9.INSTALL REFLEX REFLECTOR ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.