Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING
RM2070E _59 Vehicle Exterior _061955 EXTERIOR PANELS / TRIM _0301936 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  REMOVAL  


PROCEDURE

Hide 65632D 1.REMOVE REAR WHEEL HOUSE FRONT PLATE

Hide 75860A 2.REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY

a.
B275323E01
2.263,0.583 2.482,0.793 0.220,0.210 10 *1 2.239,0.669 1.615,1.017 false

Put protective tape around the body rocker panel moulding assembly.

Text in Illustration
*1 Protective Tape


b.
B275326

Remove the 2 screws.


c.
B275324

Remove the screw.


d.
B275325

Remove the screw.


e.
B275327

Remove the screw.


f.
B275321E01
0.911,1.937 1.093,2.116 0.182,0.180 10 *1 1.729,2.243 1.911,2.423 0.182,0.180 10 *2 2.424,2.156 2.606,2.336 0.182,0.180 10 *1 0.843,1.832 0.99,1.937 0.99,1.937 1.193,1.877 false 1.524,1.938 1.808,2.222 1.808,2.222 2.144,2.034 false 1.808,2.222 1.85,1.993 false 2.336,1.993 2.489,2.145 2.489,2.145 2.766,2.048 false

Remove the 3 side mudguard retainers and 4 No. 2 side mudguard retainers.

Text in Illustration
*1 No. 2 Side Mudguard Retainer
*2 Side Mudguard Retainer


g.
B275322

Disengage the 11 clips to remove the body rocker panel moulding assembly.