Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) › from 2017.12
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0339647 LANE DEPARTURE ALERT SYSTEM(w/ Steering Control) U

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM(w/ Steering Control)  FAIL-SAFE CHART  


FAIL-SAFE FUNCTION


a.

When a malfunction occurs in the lane departure alert system (w/ steering control), a message will be displayed on the multi-information display and the lane departure alert system (w/ steering control) will be disabled depending on the malfunction.

Warning Message Cause Fail-safe Operation Conditions to Return to Normal Condition
Lane Departure Alert Function Steering Control Function Vehicle Sway Warning Function

X: Control is suspended

LANE DEPARTURE ALERT MALFUNCTION VISIT YOUR DEALER Lane departure alert system (w/ steering control) is malfunctioning X X X After system returns to normal, power switch is turned off and then on (IG)
FRONT CAMERA UNAVAILABLE
·

Abnormal forward recognition camera voltage

·

Forward recognition camera temperature outside of operational range

·

Other forward recognition camera malfunction


X X X
·

Forward recognition camera temperature returns to normal

·

Forward recognition camera voltage returns to normal

·

Forward recognition camera returns to normal


FRONT CAMERA VISION BLOCKED CLEAN AND DEMIST WINDSHIELD Forward recognition camera view is unclear X X X Forward recognition camera or area of windshield glass in front of forward recognition camera is cleaned
LANE DEPARTURE ALERT UNAVAILABLE Sensor other than forward recognition camera sensor is temporarily unavailable X X X Temporarily unavailable sensor becomes available