Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2017.12
RM2070E _58 Vehicle Interior _061943 PRE-CRASH SAFETY _0301811 PRE-CRASH SAFETY SYSTEM D

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  OPERATION CHECK  


CHECK PRE-CRASH SAFETY SYSTEM SETTING


a.

Turn the power switch on (IG).


b.

Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-crash safety system turns on.

HINT:

When the power switch is turned on (IG), the PCS will turn on. This can be changed through a customize setting using the GTS.



c.
B434171C01
0.469,0.167 0.781,0.323 0.313,0.156 10 false *a
*a PCS Warning Light


Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.



CHECK PRE-CRASH SAFETY SYSTEM SENSITIVITY SETTING


a.

Turn the power switch on (IG).


b.

Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the warning timing adjustment display on the multi-information display changes between "Far", "Mid" and "Near" accordingly.

HINT:
·

The pre-crash safety system warning timing status remains unchanged when the power switch is turned off and back to ON. This can be changed through a customize setting using the GTS.

·

The default setting is "Mid".