Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2017.12
RM2070E _58 Vehicle Interior _061943 PRE-CRASH SAFETY _0301811 PRE-CRASH SAFETY SYSTEM D

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE PRE-CRASH SAFETY SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Make a note of the current settings before customizing.



HINT:

The following PCS functions and the pre-crash safety system sensitivity setting can be changed from their default setting.


a.

Customizing with the GTS

i.

Turn the power switch off.


ii.

Connect the GTS to the DLC3.


iii.

Turn the power switch on (IG).


iv.

Turn the GTS on.


v.

Enter the following menus: Customize Setting / Others.


vi.

Select the setting by referring to the table below.

Others
Tester Display Description Default Setting ECU
PCS Operation State Retention Setting Refer to the table below OFF 0:OFF,1:ON Driving support ECU assembly
PCS Alarm Activation Distance Retention Setting 1 Refer to the table below OFF 0:OFF,1:ON Driving support ECU assembly
PCS Alarm Activation Distance Retention Setting 2 Refer to the table below ON 0:OFF,1:ON Driving support ECU assembly
PCS Alarm Activation Distance Retention Setting 3 Refer to the table below OFF 0:OFF,1:ON Driving support ECU assembly

Customize Setting Description Setting
PCS Operation State Retention Setting Function to maintain the pre-crash safety system on/off setting when the power switch is turned off and then on (IG). OFF: Not maintained (Pre-crash safety system always turns on)
ON: Maintained
PCS Alarm Activation Distance Retention Setting 1 Function to maintain the sensitivity setting of the pre-crash safety system when the pre-crash safety system is turned off and then on. OFF: Not maintained (Setting changes to "Mid")
ON: Maintained
PCS Alarm Activation Distance Retention Setting 2 Function to maintain the sensitivity setting of the pre-crash safety system when the power switch is turned off while the pre-crash safety system is on. OFF: Not maintained (Setting changes to "Mid")
ON: Maintained
PCS Alarm Activation Distance Retention Setting 3 Function to maintain the sensitivity setting of the pre-crash safety system when the power switch is turned off while the pre-crash safety system is off. OFF: Not maintained (Setting changes to "Mid")
ON: Maintained