Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2017.12
RM2070E _58 Vehicle Interior _061943 PRE-CRASH SAFETY _0301811 PRE-CRASH SAFETY SYSTEM C

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  C1A63  Other System Malfunction  


DESCRIPTION

If the hybrid vehicle control ECU detects a malfunction in the hybrid control system or hybrid battery system, it outputs a malfunction signal to the driving support ECU assembly via CAN communication and this DTC is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1A63 Other System Malfunction With the power switch on (IG), the driving support ECU assembly receives a hybrid system malfunction signal from the hybrid vehicle control ECU for approximately 2 seconds or more.
·

Hybrid control system

·

Hybrid battery system



PROCEDURE

1.GO TO HYBRID CONTROL SYSTEM AND HYBRID BATTERY SYSTEM
HINT:

If DTC C1A63 is output by the pre-crash safety system, perform troubleshooting for the hybrid control system and hybrid battery system.



Result:
Proceed to
NEXT



NEXT

END