Home › Vehicle Interior › METER / GAUGE / DISPLAY › HEADUP DISPLAY › from 2017.12
RM2070E _58 Vehicle Interior _061940 METER / GAUGE / DISPLAY _0301795 HEADUP DISPLAY A

METER / GAUGE / DISPLAY  HEADUP DISPLAY  DISASSEMBLY  


CAUTION / NOTICE / HINT

NOTICE:

When disassembling the headup display, eliminate static electricity by touching the vehicle body to prevent components from being damaged.


PROCEDURE

Hide 1.REMOVE COMBINATION METER MIRROR GLASS

a.
E372355

Remove the 4 screws and combination meter mirror glass.


Hide 2.REMOVE METER CIRCUIT PLATE COVER

a.
E372356

Remove the 4 screws.


b.
E372357

Disengage the guide to remove the meter circuit plate cover as shown in the illustration.


Hide 3.REMOVE NO. 1 COMBINATION METER MIRROR CASE

a.
E372358

Remove the 2 screws.


b.
E372359

Disengage the 4 claws and remove the No. 1 combination meter mirror case.


Hide 4.REMOVE COMBINATION METER MIRROR

a.
E372360

Disconnect the connector.


b.
E372361

Remove the 2 screws and combination meter mirror.


Hide 5.REMOVE NO. 1 COMBINATION METER MIRROR PLATE

a.
E386075

Disengage the 2 claws and remove the No. 1 combination meter mirror plate as shown in the illustration.


Hide 6.REMOVE NO. 2 COMBINATION METER MIRROR

a.
E386076

Remove the No. 2 combination meter mirror as shown in the illustration.


Hide 7.REMOVE COMBINATION METER WIRE

a.
E386077

Disengage the clamp and disconnect the connector to remove the combination meter wire.


Hide 8.REMOVE METER CIRCUIT PLATE SUB-ASSEMBLY

a.
E386078

Remove the 2 screws.


b.
E386079

Pull the meter circuit plate sub-assembly in the direction indicated by the arrow to disengage the 2 guides and remove the meter circuit plate sub-assembly.