Home › Engine / Hybrid System › CRUISE CONTROL › FRONT CAMERA › from 2017.12
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0345288 FRONT CAMERA A

CRUISE CONTROL  FRONT CAMERA  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
·

When replacing the forward recognition camera, replace it with a new one.

·

Do not touch the camera lens or the front windshield glass in front of the camera.

·

If the forward recognition camera has been struck or dropped, replace it with a new one.

·

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket, or the lane departure alert system, forward recognition camera system, dynamic radar cruise control system, pre-crash safety system or automatic high beam system may not operate properly due to a difference in the transmissivity of the windshield glass or the shape of the black ceramic border.



PROCEDURE

Hide 86466E 1.REMOVE NO. 2 FORWARD RECOGNITION COVER

a.
E382569N01
1.323,1.438 1.479,1.635 0.156,0.198 10 true 1 0.49,1.333 0.646,1.531 0.156,0.198 10 true 2

Pull the No. 2 forward recognition cover in the direction indicated by the arrow (1) shown in the illustration to disengage the 2 claws.

NOTICE:

If these claws are disengaged separately, they may break. Insert a molding remover between them and pull it down to disengage the claws simultaneously.



b.

Pull the No. 2 forward recognition cover in the direction indicated by the arrow (2) shown in the illustration to disengage the 2 guides and remove the No. 2 forward recognition cover.


Hide 86466D 2.REMOVE NO. 1 FORWARD RECOGNITION COVER

a.
E382570

Disengage the 2 clips and 2 guides to remove the No. 1 forward recognition cover as shown in the illustration.

NOTICE:

To avoid damaging the guides, always slide the No. 1 forward recognition cover parallel to the windshield glass.



Hide 86464A 3.REMOVE FORWARD RECOGNITION LATCH

a.
E382571N01
2.49,1.042 2.646,1.24 0.156,0.198 10 true 1 0.667,1.708 0.823,1.906 0.156,0.198 10 true 2

Disengage the 2 claws in the direction indicated by the arrow (1) shown in the illustration.


b.

Disengage the 4 guides in the direction indicated by the arrow (2) shown in the illustration to remove the forward recognition latch.


Hide 8646C 4.REMOVE FORWARD RECOGNITION CAMERA

a.
E382572

Disconnect the connector.


b.

Disengage the 4 guides and remove the forward recognition camera as shown in the illustration.

NOTICE:
·

Do not pull the harness forcibly when disconnecting the connector.

·

If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.

·

If the forward recognition camera has been struck or dropped, replace it with a new one.

·

Do not touch the camera lens.