Home › Engine / Hybrid System › CRUISE CONTROL › CAMERA HEATER › from 2017.12
RM2070E _51 Engine / Hybrid System _061914 CRUISE CONTROL _0345289 CAMERA HEATER A

CRUISE CONTROL  CAMERA HEATER  INSTALLATION  


PROCEDURE

Hide 86401 1.INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:
·

Do not apply force to the heater area as the heater may become damaged.

·

Do not forcibly pull the wire harness as it may become damaged.



a.
E382583C01
0.333,1.417 0.49,1.615 0.156,0.198 10 true 1 0.698,0.458 0.854,0.656 0.156,0.198 10 true 2
V100155

Heater Area


Engage the 2 guides and 2 claws as indicated by the arrows, in the order shown in the illustration to install the No. 2 forward recognition cover.

NOTICE:

Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.



b.
E382581C02
1.844,1.594 2.115,1.594 false 1.813,0.396 1.667,1.25 1.667,1.25 2.229,0.979 false 1.938,0.563 1.667,1.25 1.667,1.25 2.135,0.844 false 2.042,0.708 1.667,1.25 false 0.594,0.302 0.417,0.083 0.417,0.083 1.521,0.156 false 0.417,0.083 1.063,0.25 false 1.635,1.542 1.948,1.698 0.313,0.156 10 false *a 1.542,1.271 1.854,1.427 0.313,0.156 10 false *b 0.229,0.063 0.542,0.219 0.313,0.156 10 false *b 2.521,1.49 2.677,1.688 0.156,0.198 10 true 9 2.531,0.885 2.688,1.083 0.156,0.198 10 false 8 2.458,0.708 2.615,0.906 0.156,0.198 10 false 7 2.333,0.563 2.49,0.76 0.156,0.198 10 false 6 2.198,0.406 2.354,0.604 0.156,0.198 10 false 5 2.083,0.229 2.24,0.427 0.156,0.198 10 false 4 1.5,0.344 1.656,0.542 0.156,0.198 10 true 3 1.146,0.427 1.302,0.625 0.156,0.198 10 true 2 0.74,0.51 0.896,0.708 0.156,0.198 10 true 1
*a Clamp
*b Rib


Engage the clamp and 8 ribs to install the forward recognition with heater hood sub-assembly.

NOTICE:

As the No. 1 forward recognition cover cannot be installed correctly if the clamp and ribs are not engaged securely, make sure to engage each clamp and rib securely.


HINT:

Engage the clamp and ribs in the order shown in the illustration.



c.

Connect the connector.


Hide 8646C 2.INSTALL FORWARD RECOGNITION CAMERA