This DTC is stored when the CAN communication system is malfunctioning.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| U023A | The main body ECU (multiplex network body ECU) does not receive data from the forward recognition camera for approximately 10 seconds or more. | ·
CAN communication system ·
Forward recognition camera |
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Clear the DTCs.
| Proceed to |
|---|
| NEXT |
NEXT
Connect the GTS to the DLC3.
Turn the power switch on (IG).
Wait 20 seconds or more.
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Trouble Codes.
Check for DTCs.
DTCs are not output.
| Result | Proceed to |
|---|---|
| OK | A |
| NG (w/o Central Gateway ECU) | B |
| NG (w/ Central Gateway ECU) | C |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
C