Home › Audio / Visual / Telematics › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM › from 2020.08
RM2070E _56 Audio / Visual / Telematics _061933 PARK ASSIST / MONITORING _0301742 REAR VIEW MONITOR SYSTEM D

PARK ASSIST / MONITORING  REAR VIEW MONITOR SYSTEM  SYSTEM DESCRIPTION  


GENERAL


a.

To assist the driver with parking the vehicle by displaying an image of the area behind the vehicle, this system has a rear television camera assembly mounted on the back door. The system displays the image on the multi-display.


b.

The rear view monitor system consists of the following components:

i.

Rear television camera assembly


ii.

Navigation receiver assembly


iii.

No. 1 integration relay


iv.

Hybrid vehicle control ECU




FUNCTION OF COMPONENTS


Item Function
Rear Television Camera Assembly
·

Mounted on the back door to transmit an image of the area behind the vehicle to the navigation receiver assembly.

·

Has a color video camera that uses a Complementary Metal Oxide Semiconductor (CMOS) and a wide-angle lens.


Navigation Receiver Assembly
·

Receives video signals, which contain an image of the area behind the vehicle taken with the rear television camera assembly.

·

Performs control of the system by receiving the reverse signal from the No. 1 integration relay.


No. 1 Integration Relay Transmits a reverse signal to the navigation receiver assembly.
Hybrid Vehicle Control ECU Transmits a reverse signal to the No. 1 integration relay.


OPERATION EXPLANATION


a.

The navigation receiver assembly receives the reverse signal when the power switch is on (IG) and the shift lever is moved to R. After receiving the reverse signal, the navigation receiver assembly switches to the rear view monitor system.