The power steering ECU assembly receives signals from the brake booster with master cylinder (skid control ECU), the hybrid vehicle control ECU assembly, the parking assist ECU, the forward recognition camera (w/ Forward Recognition Camera) via the CAN communication system.
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
|
*: w/ Forward Recognition Camera |
||
| U0129/42 | Lost communication with brake system control module | ·
CAN communication system ·
Brake booster with master cylinder (Skid control ECU) |
| U023A/45* | Lost communication with forward recognition camera | ·
CAN communication system ·
Forward recognition camera |
| U0293/41 | Lost communication with hybrid vehicle control ECU assembly | ·
CAN communication system ·
Hybrid vehicle control ECU assembly |
| U1105/46 | Lost Communication with Parking Assist ECU | ·
CAN communication system ·
Parking assist ECU |
Clear the DTCs (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>DTC CHECK / CLEAR).
Check for DTCs (See page Steering>POWER ASSIST SYSTEMS>POWER STEERING SYSTEM>DTC CHECK / CLEAR).
| Result | Proceed to |
|---|---|
| DTC is not output | A |
| DTC is output | B |
A
(See pageGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING)
B