81260A
1.REMOVE MAP LIGHT ASSEMBLY (except Glass Roof)
81260A
2.REMOVE MAP LIGHT ASSEMBLY (for Glass Roof)
86730A
3.REMOVE TELEPHONE MICROPHONE ASSEMBLY (except Glass Roof)
Remove the 8 screws.
Disconnect the connector and remove the board and cover.
Remove the microphone holder with telephone microphone assembly.
Disengage the 2 claws and remove the telephone microphone assembly from the microphone holder.
86730A
4.REMOVE TELEPHONE MICROPHONE ASSEMBLY (for Glass Roof)
Remove the 8 screws.
Disconnect the connector and remove the board and cover.
Remove the 2 screws, knob guide with telephone microphone assembly.
Disengage the 2 claws and remove the telephone microphone assembly from the knob guide.
86250E
5.REMOVE AMPLIFIER MICROPHONE ASSEMBLY
Disconnect the connector and remove the amplifier microphone assembly from the wire.